Released in September 2024
FUJIMI 1/700 Special Series No.33 Japanese Navy Battleship Mutsu. Toku33 Nihonkai Gunsen Kanmutsu Released in September 2024
[Product Introduction]
FUJIMI 1/700 Special Series No.33 Japanese Navy Battleship Mutsu. .The 1st ship of the Big Seven, the 2nd Nagato-class battleship "Mutsu", has been added with new parts! -The product is the 2nd Nagato-class battleship "Mutsu" from December 1945 (at the beginning of the war) to Showa. The motif is the appearance in June 2018 (final time). Newly designed parts have been prepared to unify differences in the reproducibility of equipment etc. depending on the product release date, and some are divided to take into account painting work. 12.7cm twin high-angle gun A type 1 is subdivided into 5 parts, existing Improved molding resolution from 2 parts. -The 9-meter cutter is made into two parts in consideration of painting, the pedestal is prepared as a separate part, and the deck can be molded as an integral part. (Except for some parts) - The canvas and wheelhouse/machine room canopy are separate parts for the 11m internal fire boat in consideration of painting. Specification to perform each painting and assembly and gluing later.・The shape of the 12 meter internal fire lunch can also be expressed without a canvas. -The carrier boat mount is molded with uneven shapes and light holes, giving it an increased sense of precision. -New chrysanthemum emblem on the bow of the ship. - A new sidelight has been prepared, and the parts that were omitted so far can be used for additional expression. - Added stern ship name (warship color filled tone) and mast white line decals.・The Type 96 25mm twin machine gun is now a standard specification with a two-part configuration that reduces painting/separation work. The hull/hull is a one-piece integrally molded part on the port and starboard sides. - Mutsu-specific parts reproduce the fairlead and anchorage positions that are different from Nagato.・On the side of the ship, the outboard electrical circuit is created by detailed carvings and is expressed all around the hull. Each deck and upper deck is a single piece structure with delicate wooden deck carvings. - Expressed with sharp engravings such as the supply cylinder on the deck, and the wooden deck has a deep engraving suitable for inking. -The base of the bridge (bridge deck) is made into an integrated part using a slide mold. The secondary gun reserve command center, which is the distinguishing point from the bridge, mast, and Captain No. 1 Gate, has four windows reproduced using special parts. -The lower bridge is a one-piece structure part made of a slide mold. -The bridge is assembled by stacking each layer, and the floor reproduces grating etc. - Detailed equipment including binocular telescopes are also made into parts on each layer of the bridge. -The three mast legs are divided into two parts to reproduce the external shape. -The cross tree and top yard use a combination of integrated parts and split parts to reproduce complex shapes. The main turret, smokestack, and main gun have a gun barrel and canvas integrated, and the elevation angle is fixed.・The main gun barrel is opened using a slide mold. -The chimney is a two-part structure with the left and right sides glued together, and the steam waste pipe is a separate part.・The structure is full of precision even when the funnel cap is removed. Slide molds are used for the rear mast, aircraft rigging, and aviation work deck, and the side walls and molding of the deck are also reproduced. -The carrier-based reconnaissance aircraft comes with two Type 95 surface reconnaissance planes, and the molding color is gray. - Others - The strip pattern on the floor, such as the high-angle gun emplacement, is expressed with detailed carvings. -The 25mm machine gun is a 2-part type with a precision molding and easy-to-paint structure, and 2018 mold parts are included as standard. -The molding color is gray for the main parts, ship bottom plate, carrier aircraft, machine gun parts, etc. - There are two types of decals included - Decals that include military flags, Japanese flags, and markings for carrier-based aircraft. - Three sizes of military flags are available. Contains 1/700 scale versions of the actual dimensions of 10 width, 6 width, and 3 width. - Contains Hinomaru of carrier-based aircraft, ally identification belt (yellow belt), etc., and includes Hinomaru that did not have a white border from the late war. -Decals that include the draft notation, the chrysanthemum emblem on the bow, and the ship name on the stern (2 types: gold and battleship color filling).
[Included contents]
Runner x36, assembly manual x1, decal x3
[Product specifications]
1/700 scale unpainted assembly kit□