Pengiriman & Pengembalian
Europe, UK: Monday, Aug 31 ~
USA: Friday, Aug 28 ~
Australia: Sunday, Aug 30 ~
Asia: Saturday, Aug 29
UAE: Sunday, Aug 30
Order within 8 Hours 16 mins with Scheduled Delivery. If you place an order within this time, We will ship on Thursday, Aug 27 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
USA: Friday, Aug 28 ~
Australia: Sunday, Aug 30 ~
Asia: Saturday, Aug 29
UAE: Sunday, Aug 30
Order within 8 Hours 16 mins with Scheduled Delivery. If you place an order within this time, We will ship on Thursday, Aug 27 2026 This delivery time is calculated by DHL and FedEx. You can check the exact delivery date on checkout page.
Perlindungan Pembeli
Pengembalian dana penuh jika tidak asli. Pengembalian dana penuh atau sebagian, jika item baru tidak seperti yang dijelaskan.
ulasan pengguna (0 rating)
apakah anda ingin memuat ulasan?
produk ini belum memiliki review....
rincian produk (2,374 characters)
Assembling is an inset type that does not require adhesive
Separate tools are required to install the parts
Completed size: Overall length 152 mm, overall width 92 mm
With double shaft motor
The Tri-Dagger XX has been redesigned with the image of Ryo Takaba's machine that appeared in "Bakuso Brothers Let's &
Go !!", such as the angular front fender and the uniquely shaped rear wing.
Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Ryo Takaba's machine with even more power] A plastic model assembly kit for a four-wheel drive racer with high-performance driving and fun racing. A double-shaft motor with extended shafts on both ends of the motor is mounted in the center of the car body and is expensive. Achieves drive efficiency. The MS chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. The Tridagger XX has a square front fender and a uniquely shaped rear wing. , Redesigned while imagining the machine of Ryo Takaba that appeared in "Bakusou Brothers Let's &
Go !!". The more powerful form is attractive. A small diameter slick tire is attached to the red color 3-spoke wheel, and the nose unit Has adopted N-02. [MS chassis] The 3-split type "MS chassis"
that realizes excellent rigidity is a "midship"
in which heavy parts such as a double shaft motor with extended shafts at both ends of the motor and a battery are placed in the center of the chassis. (MS) layout ”and Mini 4WD's traditional 4WD (four-wheel drive) mechanism provide excellent stability even at high speeds. The chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. OK. You can enjoy a wide range of setting changes speedily. * There are two types of nose units. [Basic specifications]
・ Overall length 152mm
・ Overall width 92mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.2 x 9.2 x 4.5 cm
Tags:
Separate tools are required to install the parts
Completed size: Overall length 152 mm, overall width 92 mm
With double shaft motor
The Tri-Dagger XX has been redesigned with the image of Ryo Takaba's machine that appeared in "Bakuso Brothers Let's &
Go !!", such as the angular front fender and the uniquely shaped rear wing.
Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [Ryo Takaba's machine with even more power] A plastic model assembly kit for a four-wheel drive racer with high-performance driving and fun racing. A double-shaft motor with extended shafts on both ends of the motor is mounted in the center of the car body and is expensive. Achieves drive efficiency. The MS chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. You can enjoy a wide range of setting changes speedily. The Tridagger XX has a square front fender and a uniquely shaped rear wing. , Redesigned while imagining the machine of Ryo Takaba that appeared in "Bakusou Brothers Let's &
Go !!". The more powerful form is attractive. A small diameter slick tire is attached to the red color 3-spoke wheel, and the nose unit Has adopted N-02. [MS chassis] The 3-split type "MS chassis"
that realizes excellent rigidity is a "midship"
in which heavy parts such as a double shaft motor with extended shafts at both ends of the motor and a battery are placed in the center of the chassis. (MS) layout ”and Mini 4WD's traditional 4WD (four-wheel drive) mechanism provide excellent stability even at high speeds. The chassis consists of three parts, nose, center, and tail, and can be attached and detached with a single touch. OK. You can enjoy a wide range of setting changes speedily. * There are two types of nose units. [Basic specifications]
・ Overall length 152mm
・ Overall width 92mm
・ With double shaft motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.2 x 9.2 x 4.5 cm
Tags:
