Shipping and Returns
Europe, UK: Wednesday, May 13
USA: Monday, May 11
Australia: Wednesday, May 13
Asia: Monday, May 11
UAE: Tuesday, May 12
Order within 23 Hours 31 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, May 11 2026. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.
USA: Monday, May 11
Australia: Wednesday, May 13
Asia: Monday, May 11
UAE: Tuesday, May 12
Order within 23 Hours 31 mins with Scheduled Delivery. If you place an order within this time, We will ship on Monday, May 11 2026. This delivery time is calculated by DHL & Fedex. You can check the exact delivery date on checkout page.
Buyer Protection
Full refund if not genuine. Full or partial refund, if the new item is not as described.
Customer Reviews (0 rating)
No reviews on this item...
Description (2,738 characters)
Assembling is an inset type that does not require adhesive
Separate tools are required to install the parts
Completed size: Overall length 156mm, Overall width 97mm, Overall height 48mm
3.5: 1 super speed gear with motor
Baron Viento has a classic car shape such as a long bonnet, a steep front grille, and front and rear fenders that show elegant lines.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [The body of a custom classic car is eye-catching! ] Shaft drive It is a plastic model assembly kit of a high-performance racer that adopted four-wheel drive.
Baron Viento has a classic car shape such as a long bonnet, a steep front grille, and front and rear fenders that show elegant lines.
Moreover, you can not miss the custom-made finish that has been modified called "chopped roof"
by lowering the position of the roof and lowering the vehicle height.
The body is made of light green ABS resin
In the actual vehicle, the cloth hood part expresses the texture by changing the body and surface treatment.
The front grille, which is a separate part, has a metal-like sticker for a three-dimensional effect.
[Adopting FM-A chassis with front motor layout] The chassis adopted FM-A with front motor layout incorporating aero design.
Since the center of gravity is closer to the front of the car body, it is possible to run with a sense of stability even on courses with many ups and downs.
The four rollers are also made of low friction resin, including a skid bar made of low friction resin at the bottom of the front as standard equipment.
In particular, the rear roller is an 8mm thick type with improved stability.
In addition, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly.
Various parts can be attached to the aero side stay, which was inspired by the cross-sectional shape of the wing of an airplane.
In addition, the white-collar wheels have a retro dish design that looks great on classic cars.
I also set a sticker for metallic wheels
With 3.5: 1 super speed gear
[Basic specifications]
・ Overall length 156mm, overall width 97mm, overall height 48mm when completed
・ With motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.6 x 9.7 x 4.8 cm
Separate tools are required to install the parts
Completed size: Overall length 156mm, Overall width 97mm, Overall height 48mm
3.5: 1 super speed gear with motor
Baron Viento has a classic car shape such as a long bonnet, a steep front grille, and front and rear fenders that show elegant lines.
* Batteries are not included in this kit
Two AA batteries are required separately for running
Product introduction [The body of a custom classic car is eye-catching! ] Shaft drive It is a plastic model assembly kit of a high-performance racer that adopted four-wheel drive.
Baron Viento has a classic car shape such as a long bonnet, a steep front grille, and front and rear fenders that show elegant lines.
Moreover, you can not miss the custom-made finish that has been modified called "chopped roof"
by lowering the position of the roof and lowering the vehicle height.
The body is made of light green ABS resin
In the actual vehicle, the cloth hood part expresses the texture by changing the body and surface treatment.
The front grille, which is a separate part, has a metal-like sticker for a three-dimensional effect.
[Adopting FM-A chassis with front motor layout] The chassis adopted FM-A with front motor layout incorporating aero design.
Since the center of gravity is closer to the front of the car body, it is possible to run with a sense of stability even on courses with many ups and downs.
The four rollers are also made of low friction resin, including a skid bar made of low friction resin at the bottom of the front as standard equipment.
In particular, the rear roller is an 8mm thick type with improved stability.
In addition, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly.
Various parts can be attached to the aero side stay, which was inspired by the cross-sectional shape of the wing of an airplane.
In addition, the white-collar wheels have a retro dish design that looks great on classic cars.
I also set a sticker for metallic wheels
With 3.5: 1 super speed gear
[Basic specifications]
・ Overall length 156mm, overall width 97mm, overall height 48mm when completed
・ With motor
-Assembly is an inset type that does not require adhesive [Items to be purchased separately]
・ 2 AA batteries Safety warning Not applicable
Dimension: 15.6 x 9.7 x 4.8 cm
