Own weight (g) 168 Gear ratio 5.2: 1
Maximum drag force 3 Maximum line winding length (cm / handle 1 rotation) 69
Ball / Roller Bearing 10/1 Line Capacity (m) Nylon Fluoro / PE0.165 (4lb) 100m / PE0.6-100m
Lightweight real finesse design spinning reel MGX is fully remodeled with friction-free structure
In the conventional structure, the main shaft inside the body operates while rubbing (contacting) the inside of the pinion gear, and this friction makes the reeling heavy.
On the other hand, the friction-free structure that makes the main shaft non-contact type releases this friction and realizes light and smooth rotation.
The so-called winding sensitivity, which clearly conveys minute changes transmitted to the hand during reeling, has been dramatically improved.
When fighting, a light reeling makes it suitable for one more roll, and even when eating up or running to hand, it leads to catching without loosening the line tension.
A sinker keeper, which has been well received as an optional part of the high-end MGXtreme, is standard equipment.
Active as a hook hanger as well as fixing the sinker
It frees you from the troublesome entanglement when moving
The C6 carbon rotor made of engineering plastic reinforced with carbon fiber and the Feathermetal TM body made of lightweight magnesium alloy succeed in further weight reduction without sacrificing strength and durability.
By designing a one-piece body with an integrated body cover (side plate), the size and weight of the entire body have been optimized.
Since the drive gear is supported by one part, it contributes to the improvement of the optimum gear feeling without shaking the axis.
10 Stainless HPCR Ball Bearing + 1 Roller Bearing
Salt Shield TM ball bearings with rust prevention performance are used for the pinion gear and line roller.
A water-repellent coat is applied to the entire bearing to drastically reduce the salt shaving phenomenon that causes abnormal rotation noise.
Withstands hard use in saltwater
To improve the reliability of the stopper and prevent erroneous operation, the ON / OFF switching function of instant anti-reverse is abolished.
In addition, the adoption of a new clutch has improved the reverse rotation prevention performance in winter fishing.
2WAY DRAG ™ adopted, which enables two settings, Light and Tough, by changing the assembly order of the drag washers.
AM Gearing ™ System: Unique precision machined high-strength aluminum gear for unprecedented smoothness and durability
COG Gear Design: Unique computer analysis technology optimizes gear tooth profile
Demonstrates smoothness in any situation
Rocket Line Management System TM 1. Spool Design-Abu Garcia's unique rocket spool lip releases lines from the spool more smoothly and evenly.
2. Oscillation system-The slow oscillation system allows the line to be wound more smoothly and evenly onto the spool at the optimum winding angle.
3. Bale-The unique bale opening angle controls the optimal line loop as the line is ejected from the spool lip, allowing the line to smoothly pass through the rod's first stripping guide.
Aluminum Uniflow Veil: Achieves weight reduction by using high-strength aluminum alloy
By smoothing the shape of the bale joint, troubles such as thread entanglement around the bale are drastically reduced.
By adopting a unique carbon matrix drag washer, you can apply higher drag force while maintaining smooth performance over a wide range.
Duracarbon ™ handle: Highly elastic carbon material is laminated to contribute to high strength, weight reduction and sensitivity improvement.
Spool replacement parts kit included: Abu works spool kit and Revo series spools released after 2016 are supported when installing