The motor is placed vertically on the front mid, and power is transmitted from the spur gear in the center of the vehicle body via the front and rear isometric propeller shafts.
It is a shaft drive 4WD chassis that expands the driving field, where you can enjoy not only on-road but also flat dirt and dynamic rally driving.

Equipped with 39T gear differentials on the front and rear, and a set of 40T gears for setting
It is also possible to change the front and rear drive distribution by changing the combination.
In addition, heavy objects are mounted closer to the center, and the width of the chassis is narrowed.
A long oil damper made of aluminum cylinder is attached to the double wishbone 4-wheel independent suspension.

[Main equipment parts] Drive system: Full bearing specifications, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (set of 2 39T and 1 40T), front and rear universal drive shafts
Suspension: Front and rear aluminum long damper (blue cap specification), caster block with caster angle of 6 degrees, turnbuckle upper arm
Chassis circumference: Front urethane bumper with skid angle, polycarbonate chassis cover, aluminum servo mount, high torque servo saver
Product introduction that needs to be assembled Chassis length: 368mm (excluding body etc.)
Chassis width: 180mm
Wheelbase: 257mm
Frame: Bathtub type
Drive system: Front midship motor / shaft drive 4WD
Differential gear: Oil-filled gear differential on both front and rear
Steering: 3-split tie rod type
Suspension: 4-wheel double wishbone
Damper: Aluminum cylinder long oil damper (blue cap specification)
Gear ratio = 9.58: 1 when using the 19T pinion included in the kit (14 types of gear ratios from 10.71: 1 to 6.28: 1 can be selected in combination with the separately sold pinion)
Speed controller: ESC specification (sold separately)
[Items to be purchased separately] Body, 540 type motor, RC mechanism: 2-channel radio set (transmitter, receiver, ESC, low profile servo recommended), running battery, charger, power supply for transmitter
* Batteries, batteries, chargers, etc. are required to drive this product, but they are not included in this product.
Also, the body, motor, transmitter, RC mechanism, etc. are not included.
It is necessary to purchase additional parts, assemble, and paint before running.
* This product does not use fuel
This product does not contain fuel
* This product does not include paint or adhesive.
Safety warning Please drive in a wide and safe place such as a circuit dedicated to RC cars.
Never run on the road
Do not run near crowded areas, parks or small children
Do not run in a small space or indoors
Do not run in places that disturb other people, such as schools, hospitals, and housing.
Do not run at night or early in the morning

Dimension: 37 x 18 x 10 cm


Tags:

Tamiya  Black  Car  Radio-controlled car  Tamiya (Japan Import) [Toy]  Tamiya Monster Beetle Trail GF-01TR  車  Tamiya 1/10 R/C Xv-02 PRO Chassis Kit TAM58707  Tamiya 1/10 RC Ford Bronco 2021 Cc-02 TAM58705A  Tamiya 58526 1/10 XV-01 Pro Rally Chassis Kit  Tamiya 1/10 RC Alpine A110 Jagermeister 1973 M-06 TAM58708A