[This is a useful part for improving the performance and setting of RC cars]
A retainer for mounting large diameter springs such as SSBB dampers low.
By reducing the thickness of the part between the damper end and the piston rod, the spring can be set lower on the damper, allowing smoother spring movement and maximizing the damper stroke.
The movement of the machine becomes lighter and the response of the car body, such as when turning corners, is improved.
A set of 4 blue anodized aluminum machined retainers and 4 5.5 x 0.5mm aluminum spacers.
Product introduction [This is a useful part for improving the performance and setting of RC cars] A retainer for mounting large diameter springs such as SSBB dampers low. By reducing the thickness of the part between the damper end and the piston rod, the spring can be set lower on the damper, allowing smoother spring movement and maximizing the damper stroke. The movement of the machine becomes lighter and the response of the car body, such as when turning corners, is improved. [Basic specifications] A set of 4 blue anodized aluminum cutting retainers and 4 5.5 x 0.5mm aluminum spacers. *Can be used on vehicles equipped with large diameter springs. *Depending on the type of suspension arm and damper angle, it may interfere with the suspension arm, so please cut the interfering part before use. *This product does not include fuel, cells, batteries, chargers, paint, adhesives, oil, grease, tools, etc. Safety Warning Do not use for any purpose other than its intended purpose.