A comical reproduction of the long-selling model "40" pickup truck released from 1960 to 1984, with a long history of production that began in the 1950s. ) is an assembly kit for an electric radio control car equipped with

The chassis is based on the gear drive 4WD GF-01, which has a motor mounted in the center of the monocoque frame and transmits power to the front and rear wheels using gears.
Track units have a wider ground contact area than tires, making them less likely to get stuck on rough roads such as snowy fields, sandy beaches, and muddy roads, providing stable grip and expanding the field of driving.

The chassis is based on the gear drive 4WD GF-01, and uses GF-01FT with front and rear tires changed to track units.
The track unit is installed together with the upright parts, and the power of the drive shaft is transmitted to the track by the sprocket wheel.
8 rollers are placed on the ground surface

Has a swing mechanism, and the third roller can move up and down independently
Further improves ground contact
Of course, the generous road clearance provided by the track unit is also a big attraction on rough roads.
The truck is made of resin and uses a connected assembly type using metal pins.

There is less drive loss compared to rubber, allowing smooth running even at low speeds.
In addition, there are two types of tops (tracks): a flat standard type and a grocer type with protrusions.
You can choose according to the driving road surface.

Product introduction Total length 337mm, total width 250mm, total height 236mm
Wheelbase 174mm
Track ground length 60mm x 4
Track width 39mm
Frame = monocoque type
Drive system = Center motor gear drive 4WD
Differential gear = 3 bevel type both front and rear
Steering = 2-split tie rod type
Suspension = 4 wheels double wishbone
Damper = friction both front and rear
Gear ratio=18.03:1
Motor = RS540 type
Speed controller = ESC specification (sold separately)
The photo shows the kit assembled and painted.
The body is painted
Wheel arches have been cut and holes have been drilled for body catches.
[Things to be purchased separately (not included in this product)] Fine spec 2.4G electric RC drive set, AA batteries for transmitter: 4 pieces
*A power source is required to drive this product, but batteries, batteries, chargers, etc. are not included.
Also, transmitter, RC mechanism, etc. are not included.
Additional parts purchase, assembly, and painting are required before running.
*This product does not use fuel.
This product does not contain fuel
*This product does not include paint or adhesive.
Safety Warning Please drive in a wide and safe place such as a dedicated RC car circuit.
Never run it on the road
Do not run in crowded areas, parks, or near small children.
Do not run in small spaces or indoors.
Do not run in places where it may be a nuisance to others, such as schools, hospitals, or residences.
Do not run at night or early in the morning

Dimension: ‎34 x 25 x 24 cm


Tags:

Tamiya  Toyota  Car  Radio-controlled car  Truck  Rock crawling  Toyota LandCruiser Prado  SUV