Products that require assembly and painting
Separate tools, paint, etc. are required.

Product introduction Pre-painted kit The Z-31 type was built following the Z-17 and Z-23 type destroyers that Germany had built in the 1936 plan before World War II.
With the outbreak of World War II in 1939, the original plan was changed and the plan was suddenly revised to follow the Z-23 type, and from 1940 seven ships of the same type were laid down, and from 1942 to 43 It was commissioned in the year
One of these ships was the Z-32, which was laid down in November 1940 and commissioned in September 1942.
Standard displacement: 2,603 tons, total length: 127 m, 48 caliber 15 cm gun was used as the main gun, and she was equipped with two 21-inch quadruple torpedo tubes.
From 1943 onwards, he was responsible for patrolling the area around the Straits of Dover.
In 1944, it sortied in response to the Allied invasion of Normandy.
Departing from Brest on June 9, en route to Cherbourg, she engaged a destroyer fleet consisting of the Royal Navy, Canadian Navy, and Republic of Poland Navy off the coast of Brittany, serving as a destroyer for the German Navy.
The model reproduces the German Navy destroyer Z-32 on a 1/350 scale.
Newly developed hull parts using slide molds can be assembled by selecting two types: a full-hull state that reproduces the bottom of the ship, and a floating appearance that reproduces the part above the waterline.
Moreover, it is modeled as a smart kit that combines ease of assembly and high reproducibility.
With a total length of approximately 36cm, you can enjoy the sharp style unique to a destroyer with plenty of presence.
This hull part reproduces the degaussing cable to avoid magnetic mines.
Produces a finish with dense details
In addition, superstructures such as the bridge, chimney, and mast are also reproduced with sharp parts configuration.
The deck is filled with armaments such as a 38-caliber 15cm gun turret, two quadruple torpedo tubes, and an anti-aircraft machine gun to convey a sense of tension.
In addition, the finish can be further upgraded with a wide range of photo-etched parts.
This is a model full of fulfillment that can only be achieved on a 1/350 scale.
(From Amazon.co.jp) Safety Warning Not applicable